Abstract

The unique 3D network-like cobalt oxide architecture was electrochemically deposited on nickel oxide nanoworms (NiONWs) with nickel foil (NF) substrate. After the anodic polarization of NF and its activation, a very thin film of NiO nanoworms with the average diameter of 30 nm and the length of 100 nm was successfully grown on anodized Ni foil (a-NF) by using a facile hydrothermal method under the mild conditions including a saturated alkaline solution of Ni2+ at 65 °C to prepare a-NF/NiONWs. Then, 3D network-like Co3O4 nanosheets with the average thickness of 25 nm were directly electrodeposited on a-NF/NiONWs by using cyclic voltammetry under the optimized experimental conditions. The morphologies and detailed geometrical structures of the electrodes were conducted by FE-SEM. The fabricated a-NF/NiONWs/Co3O4 electrode provides a high areal specific capacitance of 1320 mF cm-2 at a current density of 4 mA cm−2 and high mass specific capacitance of 2000 F g−1 at the current density of 6 A g−1. By using a-NF/NiONWs/Co3O4 as a positive electrode and reduced graphene oxide-deposited NF (RGO/NF) as a negative electrode, a solid-state asymmetric a-NF/NiONWs/Co3O4//RGO/NF supercapacitor was assembled and it exhibited a high specific capacitance of 471.4 mF cm-2 at a current density of 3 mA cm−2. The fabricated solid-state supercapacitor also showed good rate capacity and long-term cycling performance of 2000 cycles.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.