Abstract
This work aims to solve the problem of tradeoff between various properties and spurious mode suppression in surface acoustic wave (SAW) resonators. A high-angle rotated Y-cut LiNbO3 (LN)/SiO2/Si multilayered structure was proposed to balance the electromechanical coupling coefficient (K 2) and temperature coefficient of frequency (TCF), and the propagation characteristics of Rayleigh mode were simulated by the finite element method. For the widely existing spurious modes, the shear-horizontal wave and longitudinal modes were eliminated by optimizing the cut angle of LN and electrode thickness, and a method of double-layer electrode transverse modulation was proposed to suppress the transverse modes. This method reduces the mass loading effect by replacing the electrode from Cu to Cu/Al. Moreover, the Al thicknesses in different regions are changed to perform the transverse modulation, and thus a widespread suppression of transverse modes is achieved by exciting the piston mode and enhancing the energy constraint, with a significant improvement on quality factor at the resonance frequency. Eventually, the spurious-free SAW resonator has the K 2 of 9.5% and the TCF close to zero. This work provides a feasible scheme for the design of high performance SAW resonators with spurious mode suppression.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
