Abstract
In this work, we demonstrate the high-performance of a PEDOT:PSS free organic photovoltaic cell (OPVC) using an air-plasma modified ITO surface, followed by controlled solvent evaporation and annealing of the P3HT:PCBM photoactive layer. Ultraviolet photoelectron spectroscopy (UPS), X-ray photoelectron spectroscopy (XPS), and conductive atomic force microscopy (c-AFM) results show that the work function of ITO was increased to as high as that of PEDOT:PSS (5.2 eV) after air-plasma treatment, along with significantly enhanced electrical homogeneity. From the dynamic secondary ion mass spectroscopy (DSIMS) results, we confirm that the thermodynamic stability of the slow-dried active layer is attributed to the uniform vertical compositional distribution on the air plasma treated ITO surface, even after thermal annealing at 150 °C for 10 min. The resulting device has an open-circuit voltage of 0.65 V, a fill factor of 63%, and a power conversion efficiency of 3.38%, providing a high performance PEDOT:PSS free OPVC device.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
