Abstract

We first report high-performance n-i-p-type perovskite photodetectors (PDs) by employing n-type graphene (GR) transparent conductive electrodes (TCEs). The n-type GR is prepared by doping with ethylene diamine, diethylene triamine, and triethylene tetramine (TETA) containing two, three, and four amine groups, respectively. With increasing the number of amine groups (An) to four, the sheet resistance of the doped GR TCE is reduced to ∼205 Ω/sq with only an ∼1% decrease of the transmittance at 550 nm while the work function is gradually enhanced to ∼4.46 eV, meaning n-type doping. The PDs optimized at An = 4 exhibit 106 photocurrent/dark current ratio, 0.343 AW–1 responsivity (R), 5.82 × 109 cm Hz1/2-W-1 specific detectivity, 108 dB linear dynamic range, and 1.02 μs response time, comparable to the performances of the previously reported indium tin oxide-based perovskite PDs. In addition, flexible perovskite PDs with TFSA-doped GR TCEs show excellent bending stability, maintaining approximately 70% of the o...

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call