Abstract
La0.58Sr0.4Co0.2Fe0.8O3-δ (LSCF) cathodes on metal-supported solid oxide fuel cells (MSCs) were fabricated by a novel sintering approach and electrochemically tested in single-cell measurements. The sintering of cathodes on complete cells was performed under argon atmosphere at 950°C in order to prevent strong oxidation of the metallic support. During this sintering process, a phase decomposition of LSCF occurred, which was found to be reversible upon heating in ambient air. The observed performance increase of MSCs with cathodes sintered ex situ, compared to cells processed under standard conditions, revealed a beneficial effect of the increased sintering temperature on cell performance. At 750°C and 0.7 V a current density of 0.96 A/cm2 was achieved. A stronger adherence of the cathodes sintered ex situ was observed after single-cell measurements. In additional experiments, La0.58Sr0.4CoO3-δ (LSC) was applied as an alternative cathode for MSCs. These cells were activated in situ at 850°C due to the lower thermochemical stability of LSC and indicated potential for further improvement of the cell performance. The successful electrochemical characterization of the cells with LSCF cathodes sintered ex situ confirmed the applicability of the novel sintering procedure as well as the improved adherence achieved by the optimized processing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
