Abstract

AbstractUsing circular and rectangular resonators, a new design of a compact microstrip lowpass filter (LPF) with negligible losses is proposed and fabricated. The proposed LPF has a 3 dB cut‐off frequency at 1.375 GHz with an adjusting range of 14.5%; moreover, the suggested configuration leads to a competitive roll‐off rate of 189 dB/ GHz and a negligible group delay of 0.47 ns. Attenuator cells have capability to produce numerous transmission zeros (TZs) at high frequencies; consequently, an ultra‐wide stopband (14 fc) with high suppression level (25 dB) is successfully obtained. Furthermore, the LPF has a small size of 0.067λg × 0.134λg (λg is the guided wavelength at 1.375 GHz). The transfer function is also calculated to adjust the location of the main TZs and the cut‐off frequency. Finally, an acceptable similarity between the simulated results and the tested ones verifies the simulation results.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.