High-Performance Low-Voltage Flexible Photodetector Arrays Based on All-Solid-State Organic Electrochemical Transistors for Photosensing and Imaging.

Abstract

The identifying characteristic of an organic electrochemical transistor (OECT) is the coupling between ionic and electronic charges within the entire volume of the channel. In this work, by taking advantage of the volumetric nature of the OECTs' response, a novel flexible photodetector is reported for the first time based on all-solid-state OECT with an excellent responsivity of up to 6.7 × 106 A/W, detectivity as high as 3.6 × 1013 Jones, and a fast response of ∼0.13 s in the visible range, which are superior to those of the majority of the reported organic phototransistors (OPTs) based on field-effect transistors (FETs) and even better than those of FET-based phototransistors with two-dimensional (MoS2 and graphene) and perovskite materials. The high performance of the devices was ascribed to the combination of the higher carrier mobility of poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) (PEDOT:PSS) as a channel and the volumetric nature of the OECTs' response, and the charge density of the volumetric channel was efficiently modulated by incident light compared to FETs. Moreover, OECT-based OPTs with quantum dots (CdSe/ZnS) as a light sensitizer were characterized under ultraviolet light, and they exhibited excellent photosensitivity, which further verified the superiority of OECT for phototransistors. Furthermore, a flexible image sensor was fabricated for the first time by integrating flexible OECTs-OPTs into a 10 × 10 array, which can clearly identify the target image under a bending state, indicating the great potential of OECTs-OPTs in the application of low-power, ultrasensitive flexible photodetectors and imaging technology.