Abstract
Source of light ions with high intensities The (SILHI) source has been producing proton beams since 1996. The first aim is to produce up to 100 mA cw beams at 95 keV for the injector of protons for high intensity demonstrator. This prototype is developed by a CEA/DSM–CNRS/IN2P3 collaboration for applications such as accelerator driven systems for nuclear waste transmutation, production of radioactive ion beams, or secondary particles. To measure installation reliability, continuous 5 day long runs have been performed. In October 1999, a 99.96% availability was achieved with a single short beam off and a 103 H uninterrupted beam. A new extraction system leads to lower beam losses and higher LEBT transparency. SILHI now produces a 95 keV–130 mA total beam with a proton fraction higher than 80%. Up to a 157 mA (247 mA/cm2) total cw beam has been extracted. The new EPICS control system, electromagnetic interference hardened devices and automatic control procedures now allow us to do longer runs. To analyze the reliability of these upgrades, a 4 week test was planned. In the framework of the International Fusion Material Irradiation Facility project CEA participation, 135 mA–95 kV deuteron pulsed beams were produced. Extraction simulations and recent SILHI results are also presented. In addition, a new test bench has been recently developed to analyze H− beam production.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.