High-gain observer-based pump/valve combined control for heavy vehicle electro-hydraulic servo steering system

Abstract

Electro-hydraulic servo steering system (EHSSS) has been widely used in multi-axle heavy vehicles. Noteworthy, the traditional EHSSS controlled only by servo solenoid valve has amounts of energy loss in throttling orifice. Although the steering control accuracy is ensured, it leads to low energy efficiency. In this paper, a novel pump/valve combined control (PVCC) EHSSS is proposed to increase the energy efficiency, which only uses one servo motor pump and one servo solenoid valve to drive the steering trapezoid mechanism. Based on the control objectives of low pressure difference in valve orifice and high steering tracking performance, a dual-input-dual-output control strategy is proposed. To guarantee the high steering tracking performance of PVCC steering system, a high-gain observer based sliding mode controller (HGO-SMC) is designed for controlling the spool displacement of servo solenoid valve. During the steering process, the servo motor pump is controlled by a simple speed feedforward and PID controller, so that the pressure difference in throttling orifice is kept at a low value to reduce the energy wasted. The experimental comparison results show that the proposed method can achieve the same tracking performance as valve control EHSSS with less energy consumption.