High‐frequency dielectric analysis of carbon nanofibers from pan precursor at different pyrolysis temperatures

Abstract

AbstractCarbon nanofibers (CNF) produced from pyrolysis of electrospun polyacrylonitrile (PAN) precursor has received a great amount of attention due to their promising potentials. However, there are limited studies on the electrical properties of the CNF, especially at high‐frequency range. In this study, CNF from PAN precursor were produced by electrospinning technique. Characterizations of the nanofibers were carried out in terms of physical, dielectric, and chemical properties. The stabilization of nanofibers took place at 240°C whilst carbonization process took place at temperatures of 800°C, 1000°C, and 1200°C, respectively. In terms of physical properties, the color of the nanofiber webs changed from white to brown and black, after stabilization and carbonization process accompanied by significant reduction in average fiber diameter. Dielectric analysis of the nanofibers was obtained by measuring the wave propagation characteristics at frequency range of 1 GHz to 10 GHz. Higher dielectric constants of the material were observed for fibers processed at higher carbonization temperatures. Good conductivity was also observed with loss tangent value that is higher than 1. The results were correlated with FTIR transmittance results, indicating greater amount of carbon are present in the nanofiber material. From the findings, the unique behavior of the nanofibers makes it practically potential for sensor applications. Explorations of future research in this area are to be sought.