High-Frequency 0.36BiScO3-0.64PbTiO3 Ultrasonic Transducer for High-Temperature Imaging Application.

Abstract

( 1- x )BiScO3- x PbTiO3 (BS-PT) ceramics have excellent piezoelectricity and high Curie temperature at its morphotropic phase boundary (MPB) ( x = 0.64 ), so it is a promising piezoelectric material for fabricating high-temperature ultrasonic transducer (HTUT). Electric properties of 0.36BS-0.64PT ceramics were characterized at different temperatures, and an HTUT with the center frequency of about 15 MHz was designed by PiezoCAD based on the measuring results. The prepared HTUT was tested in a silicone oil bath at different temperatures systematically. The test results show that the HTUT can maintain a stable electrical resonance until 290 °C and get a clear echo response until 250 °C with slight changes of the center frequency. Then, a stepped metal block submerged in silicone oil was imaged by the HTUT until 250 °C. Velocity of silicone oil and axial resolution of the HTUT at different temperatures was calculated. The results verify the capability of 0.36BS-0.64PT-based HTUT for high-temperature ultrasonic imaging applications.