Abstract

High freestream turbulence along a gas turbine airfoil and strong secondary flows along the endwall have both been reported to significantly increase convective heat transfer. This study superimposes high freestream turbulence on the naturally occurring secondary flow vortices to determine the effects on the flowfield and the endwall convective heat transfer. Measured flowfield and heat transfer data were compared between low freestream turbulence levels (0.6%) and combustor simulated turbulence levels (19.5%) that were generated using an active grid. These experiments were conducted using a scaled-up, first stage stator vane geometry. Infrared thermography was used to measure surface temperatures on a constant heat flux plate placed on the endwall surface. Laser Doppler velocimeter (LDV) measurements were performed of all three components of the mean and fluctuating velocities of the leading edge horse-shoe vortex. The results indicate that the mean flowfields for the leading edge horseshoe vortex were similar between the low and high freestream turbulence cases. High turbulence levels in the leading edge-endwall juncture were attributed to a vortex unsteadiness for both the low and high freestream tubulence cases. While, in general, the high freestream turbulence increased the endwall heat transfer, low augmentations were found to coincide with the regions having the most intense vortex motions.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call