Abstract
Abstract Multi-wall carbon nanotubes (MWCNTs)/polyaniline (PANI)/polyethersulfone (PES) membranes were fabricated by incorporation of in-situ polymerised MWCNTs/PANI complex for effective removal of natural organic matter (NOM) in water. The membrane showed high permeability (1400 L/m2/h (LMH)/bar), which is 30 times greater than the PES membrane. High NOM rejection rate (80%) was also observed for the composite membrane, which is 4 times higher than PES membrane. This superior performance is attributed to the synergetic effect of increased porosity, narrow pore size distribution and hydrophilicity, and positively charged of the membranes by the inclusion of MWCNTs/PANI complex. MWCNTs/PANI electron transfer complex successfully engineered chemical/physical properties of the membrane in order to have high NOM adsorption capacity and fast water flux. It is suggested that enhanced adsorption capacity is attributed to the electrostatic interaction between NOM and the membrane surface. Key factors contributing to the fast water flux and removal mechanism were covered in depth by characterization of physical and chemical properties of the membrane. The membrane demonstrated 100% water flux recovery and 65% total fouling ratio after cleaning with 0.1 M HCl/0.1 M NaOH solution for 1 h.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
