High energy storage performance induced by the introduction of BiScO3 into (Bi0.5Na0.5)TiO3–BaTiO3 lead-free ferroelectric ceramics

Abstract

In this work, ternary 0.25(Bi0.5Na0.5)TiO3-(0.75-x)BaTiO3-xBiScO3(abbreviated as 0.25BNT-(0.75-x)BT-xBS, x = 0.19, 0.21, 0.23, 0.25, 0.27) lead-free ferroelectric ceramics were synthesized using the solid-state reaction method. The introduction of BiScO3 into (Bi0.5Na0.5)TiO3–BaTiO3 ceramics had a significant impact on changing the phase structures, and microstructures, as well as the dielectric and ferroelectric properties. All ceramics exhibited a coexistence of tetragonal(P4bm) and rhombohedral(R3c) perovskite phases, while the influence of the BiScO3(BS) content on the average grain size was not significant. Slim polarization-electric field hysteresis loops were recorded for the 0.25BNT-(0.75-x)BT-xBS ceramics, with low remnant polarization (Pr) and large maximum polarization(Pmax). 0.25BNT-0.50BT-0.25BS ceramic had the largest Pmax, which induced a high energy storage density of 2.93 J/cm3 and energy storage efficiency of 91 % under a low electric field of 230 kV/cm 0.25BNT-0.50BT-0.25BS ceramic not only yielded excellent fatigue resistance, but also maintained good energy storage performance at high temperature and high frequency, which are considered of great importance since they can be leveraged for the potential development of high temperature and frequency capacitors. In addition, an excellent pulse performance was measured, with a high discharge energy density of 3.42 J/cm3 and a fast discharging rate t0.9 of 130 ns. This good pulse performance was maintained at high temperatures, suggesting that the proposed material is also highly competitive for applications where high-temperature pulse devices are required.