Abstract
Amorphous Fe32Ni52Zr3B13, prepared by rapid solidification, undergoes crystallization during high-energy mechanical milling. The resulting structure consists of face-centered cubic (fcc) FeNi and Zr3Ni20B6 nanocrystallites. Structural evolution and defect analysis of as-solidified Fe32Ni52Zr3B13 ribbons with different milling times is investigated. From the differential thermal analysis (DTA) curve of amorphous ribbons, exothermic peaks were observed at 415°C and 475°C corresponding to the crystallization of fcc Zr3Ni20B6 phase and fcc FeNi phase, respectively. However, high-energy mechanical milling induces the formation of FeNi within the first 2h of mechanical milling. Further milling induces the crystallization of Zr3Ni20B6. Doppler broadening positron annihilation spectroscopy (DBPAS) was used to investigate vacancy-type defects. The milling-induced crystallization appears to be related to enhanced vacancy-type defect concentrations allowing growth of pre-existing Fe(Ni) nuclei. The milling and enhanced vacancy concentration also de-stabilizes the glass, leading to decreased crystallization temperatures for both phases, and ultimately eliminating the glass transition altogether.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
