High-Energy-Density Cathode Achieved via the Activation of a Three-Electron Reaction in Sodium Manganese Vanadium Phosphate for Sodium-Ion Batteries.

Abstract

Sodium superionic conductor (NASICON)-type Na3 V2 (PO4 )3 has attracted considerable interest owing to its stable three-dimensional framework and high operating voltage; however, it suffers from a low-energy density due to the poor intrinsic electronic conductivity and limited redox couples. Herein, the partial substitution of Mn3+ for V3+ in Na3 V2 (PO4 )3 is proposed to activate V4+ /V5+ redox couple for boosting energy density of the cathodes (Na3 V2- x Mnx (PO4 )3 ). With the introduction of Mn3+ into Na3 V2 (PO4 )3 , the band gap is significantly reduced by 1.406eV and thus the electronic conductivity is greatly enhanced. The successive conversions of four stable oxidation states (V2+ /V3+ , V3+ /V4+ , and V4+ /V5+ ) are also successfully achieved in the voltage window of 1.4-4.0V, corresponding to three electrons involved in the reversible reaction. Consequently, the cathode with x = 0.5 exhibits a high reversible discharge capacity of 170.9 mAh g-1 at 0.5 C with an ultrahigh energy density of 577Wh kg-1 . Ex-situ x-ray diffraction (XRD) analysis reveals that the sodium-storage mechanism for Mn-doped Na3 V2 (PO4 )3 consists of single-phase and bi-phase reactions. This work deepens the understanding of the activation of reversible three-electron reaction in NASICON-structured polyanionic phosphates and provides a feasible strategy to develop high-energy-density cathodes for sodium-ion batteries.