Abstract
A high efficient 915 MHz rectenna is designed using a harmonic rejection low pass filter (LPF). The proposed rectenna consists of a slot coupled dipole antenna and high order harmonic rejection LPF, voltage doubler type rectifier, a LPF for the DC path, and resistive load. The use of a 2nd and 3rd harmonic rejection LPF in the rectenna results in high conversion efficiency. Performance of rectenna is analyzed using harmonic balance analysis. The proposed rectenna achieves a RF to DC conversion efficiency of 74.8 % when the received RF power is 62.2 mW. The maximum output DC voltage across R L was 7.2 V at a distance of d = 50 cm from the transmitter and the possible maximum transmission distance can be achieved by 2 m at steel box girder type Gimpo Bridge
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.