High-Efficiency Two-Dimensional Perfectly Vertical Grating Coupler With Ultra-Low Polarization Dependent Loss and Large Fibre Misalignment Tolerance

Abstract

A two-dimensional grating coupler (2D GC) with four access waveguides is proposed and demonstrated for polarization independent and perfectly vertical coupling. Benefitting from the perfectly vertical coupling and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$1\times 4$ </tex-math></inline-formula> power splitting/combing scheme, broadband polarization independent operation can be achieved. Through grating apodization with etched square holes, a simulated coupling efficiency (CE) of 65% (−1.87 dB) is obtained with a minimum feature size of 180nm which is compatible with the 193-nm deep UV lithography technology. To characterize the device performance, a back-to-back configuration of this 2D GC was fabricated, where phase-delay lines with similar patterns are introduced to ensure the phase equality between different waveguide arms. A CE of 49% (−3.1 dB) was experimentally measured, with a 1-dB bandwidth of 42 nm and PDL below 0.2 dB across the wavelength range from <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$1.5~\mu \text{m}$ </tex-math></inline-formula> to <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$1.6~\mu \text{m}$ </tex-math></inline-formula> . The fibre misalignment tolerance of this device was also investigated by measurement. The excess coupling loss and PDL caused by <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\pm 2~\mu \text{m}$ </tex-math></inline-formula> fibre misalignment are lower than 1 dB and 0.8 dB respectively, and the maximum excess coupling loss and PDL caused by ±2° fibre angle error is 1 dB and 0.7 dB respectively. Finally, optical modulation using this device is preliminarily demonstrated by the embedded thermal-optic functions.