Abstract
High-efficiency silicon solar cells for space use were developed, and the manufacturing process was established. The maximum size of these cells is 4*6 cm. The cells have fine grid patterns formed by photolithography and the lift-off technique. Obtained AM0 efficiencies of 50, 70, and 100 mu m-thick 4*6 cm BSFR cells at 28 degrees C were 14.3%, 14.5%, and 14.8%, respectively. Those of 200 mu m BSR cells with 10 Omega -cm substrate and 2 Omega -cm substrate were 12.7% and 13.6%, respectively. Work to increase the electrical output of these cells is discussed. At present nontexturized 100 mu m cells show 16.1% and texturized 200 mu m cells show 17.3%. >
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.