High-efficiency removal of Pb (II) and Cu (II) by amidoxime functionalized silica aerogels: Preparation, adsorption mechanisms and environmental impacts analysis

Abstract

In this work, a novel adsorbent was evaluated for eliminating heavy metal ions from water. The cyano-functionalized silica aerogels (ANSA-X) were fabricated by functionalizing silica aerogel with 2-cyanoethyltriethoxysilane, and then further by the reaction with hydroxylamine hydrochloride to obtain amidoxime-functionalized silica aerogels (AOSA-X) with a large specific surface area. The FTIR and NMR analysis indicated that cyano was successfully transformed into amidoxime groups. Adsorption experiments showed the adsorption performed well with the Langmuir isotherm, and AOSA3 exhibited the optimum adsorption property with 598.05 mg/g for Pb (II) and 534.10 mg/g for Cu (II). The thermodynamic results indicated that spontaneous endothermic process was the nature of the adsorption. The adsorption rate of AOSA3 was above 86% after five successive adsorption–desorption cycles. XPS analysis and DFT calculations demonstrated that the N and O atoms participated in the chelating adsorption of Pb (II) and Cu (II), and the N atom on the amidoxime groups played a dominant role. Life Cycle Analysis (LCA) evaluated the environmental effect of the preparation of 1 kg AOSA3 adsorbent, identified the environmental factors with high environmental impact, proposed alternative solutions, proved the feasibility of preparing a novel high-efficiency amidoxime-based adsorbent, and provided a guideline for the sustainable mass production of AOSA3 adsorbent. In conclusion, AOSA3 demonstrated to have promising application perspectives in heavy metal effluent treatment.