Abstract
ABSTRACTIn this article, a radio frequency (RF) power amplifier (PA) with high efficiency and high linearity is presented by using dynamic load modulation (DLM) technique. To improve the average efficiency, the load impedance is dynamically modulated according to the input envelop using tunable matching circuit (TMC). The TMC using varactors is located at a low‐impedance region of the output matching network. This reduces the RF voltage swing across the varactors, which minimizes the performance degradation by the varactors. The measurement setup is constructed to generate a control signal for the TMC that is synchronized with an input envelope. For wideband code division multiple access (W‐CDMA) signal with a peak‐to‐average ratio of 7.4 dB and a bandwidth of 3.84 MHz at 1.85 GHz, the fabricated DLM PA shows a power‐added efficiency of 49.7% at an output power of 30.6 dBm with an adjacent channel leakage ratio of <–45 dBc © 2016 Wiley Periodicals, Inc. Microwave Opt Technol Lett 58:2717–2722, 2016
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
