Abstract
This paper presents high definition (HD) map-based localization using advanced driver assistance system (ADAS) environment sensors for application to automated driving vehicles. A variety of autonomous driving technologies are being developed using expensive and high-performance sensors, but limitations exist due to several practical issues. In respect of the application of autonomous driving cars in the near future, it is necessary to ensure autonomous driving performance by effectively utilizing sensors that are already installed for ADAS purposes. Additionally, the most common localization algorithm, which is usually used lane information only, has a highly unstable disadvantage in the absence of that information. Therefore, it is essential to ensure localization performance with other road features such as guardrails when there are no lane markings. In this study, we would like to propose a localization algorithm that could be implemented in the near future by using low-cost sensors and HD maps. The proposed localization algorithm consists of several sections: environment feature representation with low-cost sensors, digital map analysis and application, position correction based on map-matching, designated validation gates, and extended Kalman filter (EKF)-based localization filtering and fusion. Lane information is detected by monocular vision in front of the vehicle. A guardrail is perceived by radar by distinguishing low-speed object measurements and by accumulating several steps to extract wall features. These lane and guardrail information are able to correct the host vehicle position by using the iterative closest point (ICP) algorithm. The rigid transformation between the digital high definition map (HD map) and environment features is calculated through ICP matching. Each corrected vehicle position by map-matching is selected and merged based on EKF with double updating. The proposed algorithm was verified through simulation based on actual driving log data.
Highlights
Vehicles with partially automated driving capabilities developed from advanced driver assistance systems (ADASs) have been competitively introduced by major carmakers [1,2]
The localization algorithm is based on well-understood approaches, including lane and guardrail detection, iterative closest point (ICP) point-to-plane matching, and extended Kalman filter
The vehicle had long- and mid-range radar and one four-layer lidar mounted on the front bumper
Summary
Vehicles with partially automated driving capabilities developed from advanced driver assistance systems (ADASs) have been competitively introduced by major carmakers [1,2]. We take into account the three major issues in vehicle position estimation based on map information: environment features, correction method of vehicle position, and filtering with information fusion. In order to correct the position of the host vehicle using environment features and a digital map, a proper map-matching algorithm is necessary. The key contribution of this paper is a thorough experimental evaluation of a vehicle localization algorithm for automated driving on real highway roads. The localization algorithm is based on well-understood approaches, including lane and guardrail detection, ICP point-to-plane matching, and extended Kalman filter.
Sign-in/Register to view highlights & summary 
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
