High cycle fatigue mechanisms of aluminum self‐piercing riveted joints

Abstract

AbstractA study examining the fatigue failure mechanism of self‐piercing riveted (SPR) joints between aluminum alloy 6111‐T4 and 5754‐O is presented in this paper. In particular, the high‐cycle fatigue behavior of the SPR joints in the lap‐shear configuration is characterized. Experimental fatigue testing revealed that failure of SPR joints occurred because of cracks propagating through the sheet thickness at locations away from the rivet. In‐depth postmortem analysis showed that significant fretting wear occurred at the location of the fatigue crack initiation. Energy dispersive X‐ray of the fretting debris revealed the presence of aluminum oxide that is consistent with fretting initiated fatigue damage. High‐fidelity finite element analysis of the SPR process revealed high surface contact pressure at the location of fretting‐initiated fatigue determined by postmortem analysis of failed coupons. Furthermore, fatigue modeling predictions of the number of cycles to failure based on linear elastic fracture mechanics supports the conclusion that fretting‐initiated fatigue occurred at regions of high surface contact pressure and not at locations of nominal high‐stress concentration at the rivet.