Abstract
In the present work, equal channel angular pressing of commercial pure aluminum 1070 was performed up to 4 passes using route Bc. For equal channel angular pressing operation, a suitable die set was designed and manufactured. X-ray diffraction analysis was used to determine the microstructure of the equal channel angular pressing-ed material. The fracture surface morphology and microstructure after fatigue were investigated by scanning electron microscopy. Mechanical properties of the equal channel angular pressing-ed material were evaluated by hardness and tension tests. Also, cyclic deformation behavior of severe plastic deformation Al1070 has been studied and results show a significant variation in hardness, ultimate strength and fatigue properties in high cycle fatigue life. Coefficient of fatigue strength σ′f and Bridgman correction factor have been obtained by S-N curve and tension test specimens, respectively, and compared before and after equal channel angular pressing process. Also an useful relation has been derived between fatigue life ( Nf) and stress amplitude ( σa) in high cycle fatigue region. Results indicated that there was not clear relation between fatigue strength coefficient and true corrected fracture stress in this case.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
