High critical current properties of multi-filamentary MgB2 superconducting wires fabricated using an internal Mg diffusion method

Abstract

Although both the mass density and grain connectivity of MgB2 superconducting layers can be greatly improved via an internal Mg diffusion (IMD) process, the poor structural uniformity and low MgB2 filling factor of IMD wires limit further enhancement of their superconducting performance. Herein, we prepared 19-filament and 37-filament IMD-MgB2 superconducting wires using a combination of optimization of the component structure and the introduction of an intermediate annealing process. Microstructure analysis suggests that good structural uniformity and high layer density have been achieved in the multi-filamentary MgB2 wires, and the MgB2 filling factor reaches 9.3%–11.0%. The magnetic superconducting transition of MgB2 wires is relatively sharp, and the onset T c is around 37 K. Remarkably, there is no magnetic flux jump for 37-filament wires in the low-field region at 5 K. At 4.2 K and 4 T, the transport layer J c values of 19-filament and 37-filament MgB2 wires are as high as 1.5 × 105 A cm−2 and 2.2 × 105 A cm−2, respectively, with, accordingly, engineering J e values of 1.7 × 104 A cm−2 and 2.0 × 104 A cm−2. These results indicate that the performance of multi-filamentary IMD-MgB2 wires can compete with traditional powder-in-tube-MgB2 wires applied in industry.