Abstract
Antimony (Sb) has been considered a promising anode for sodium-ion batteries (SIBs) owing to its high theoretical capacity (660 mA h g-1) and low redox voltage (0.2-0.9 V vs Na+/Na). However, the capacity degradation caused by the volumetric variation during battery discharge/charge hinders the practical application. Herein, guided by the DFT calculation, Sb/Fe2S3 was fabricated by annealing Fe and Sb2S3 mixed powder. Next, Sb/Fe2S3 was blended with 15 wt % graphite by ball milling, yielding nano-Sb/Fe2S3 anchored on an exfoliated graphite composite (denoted as Sb/Fe2S3-15%). When applied as an anode of SIBs, Sb/Fe2S3-15% delivered reversible capacities of 565, 542, 467, 366, 285, and 236 mA h g-1 at current rates of 1, 2, 4, 6, 8, and 10 A g-1, respectively, surpassing most of the Sb-based anodes. The co-existence of highly conductive Fe2S3 and Sb minimizes the polarization of the anode. Our experiments proved that the Sb and Fe2S3 phases were reversible during discharge/charge cycling, and the exfoliated graphite can accelerate the Na+ diffusion and e- conduction. The proposed synthesis method of this work can also be applicable to synthesize various antimony/transition metal sulfide heterostructures (Sb/M1-xS), which may be applied in a series of fields.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.