Abstract
Total reflection X-ray fluorescence (TXRF) analysis is one of the useful techniques for determining trace elements. Owing to the high detection sensitivity of X-ray fluorescence in small residues, the hydrophobic substrates are generally used to form dot-type residue. However, when measuring low-Z elements in sample solutions with high concentrations of matrix elements, obtaining sufficient measurement sensitivity can be difficult. X-ray fluorescence is absorbed by the matrix elements, which means that the absorption effect increases in the thicker dried residue compared to the thinner dried residue. To avoid this absorption effect, we have proposed a thin film-type residue. In this study, the glass substrate was treated with an ammonia-hydrogen peroxide mixture (APM). The hydrogen peroxide decomposes organic components, and ammonia slightly etches glass materials. The APM-treated region was limited to a diameter of 6 mm by using a polytetrafluoroethylene mask placed on the glass substrate. As a result, the surface is refreshed to expose the hydroxyl group to make it superhydrophilic. The measured contact angle was 5°. By using the APM-treated superhydrophilic substrate to prepare dried residue, the net intensities in low Z elements were improved. The ratio of Al Kα intensity, calculated as net intensity in the APM-treated substrate divided by it in the hydrophobic substrate, was 2.29. The recovery of each element in the APM-treated substrate was almost 100%; however, recoveries of elements (Al, P, K, and Ca) in the hydrophobic substrate showed significant deviations from 100% (the recovery of Al was approximately 32%). In summary, we successfully improved both analytical sensitivity and accuracy in TXRF analysis by using the APM treated substrate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.