Abstract
An IEEE 1149.5 module test and maintenance (MTM) bus slave module interface core is presented, which is used for direct access from the system bus to the IEEE 1149.1 chip-level or on-chip buses to facilitate hierarchical system test and diagnosis. The hierarchical test methodology also is presented, which is applicable to the system-on-chip environment, All the standard 1149.1 instructions, such as SAMPLE/PRELOAD, EXTEST, BYPASS, and even RUNBIST, can be performed within three 1149.5 read/write-data message cycles. The messages are transmitted between the MTM-bus master module (Ill-module) and the slave module (S-module). We adopt the full test access port control method to activate the 1149.1 boundary-scan paths via the 1149.5 MTM-bus. Our S-module interface circuit implements 16 CORE commands and one read/write-data command. It has been prototyped using a field-programmable gate array chip and implemented by a full-custom chip. Hierarchical test of multiple 1149.1 compatible boards has been experimentally verified.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have