Abstract

Hierarchical micro-mesoporous carbon (denoted as HPC-2 in this study) was synthesized by pre-carbonization of biomass Sichuan pepper followed by KOH activation. It possessed well-developed porosity with the specific surface area of 1823.1 m2 g−1 and pore volume of 0.906 cm3 g−1, and exhibited impressive supercapacitive behaviors. For example, the largest specific capacitance of HPC-2 was tested to be ca. 171 F g−1 in a three-electrode setup with outstanding rate capability and stable electrochemical property, whose capacitance retention was near 100% after cycling at rather a high current density of 40 A g−1 for up to 10,000 cycles. Furthermore, a two-electrode symmetric supercapacitor cell of HPC-2//HPC-2 was constructed, which delivered the maximum specific capacitance and energy density of ca. 30 F g−1 and 4.2 Wh kg−1, respectively, had prominent rate performance and cycling stability with negligible capacitance decay after repetitive charge/discharge at a high current density of 10 A g−1 for over 10,000 cycles. Such electrochemical properties of HPC-2 in both three- and two-electrode systems are superior or comparable to those of a great number of porous biomass carbon reported previously, hence making it a promising candidate for the development of high-performance energy storage devices.

Highlights

  • Due to the increasing deterioration of environment and the urgent demand for clean and renewable energy, advanced energy storage technologies have gained considerable attention [1,2,3]

  • A type of cost-effective and environmental friendly carbon electrode materials is developed for energy storage, while providing a new promising application of Sichuan pepper

  • To build a symmetric supercapacitor cell, two pieces of circular nickel foam coated with the same amount of hierarchical porous carbon (i.e., HPC-2) were wetted by aqueous solution of 2 M KOH, paired face to face with a polypropylene separator sandwiched in between, and sealed in a two-electrode device

Read more

Summary

Introduction

Due to the increasing deterioration of environment and the urgent demand for clean and renewable energy, advanced energy storage technologies have gained considerable attention [1,2,3]. Some effective strategies, including one-step activation, template method as well as combination of carbonization and activation, have been proposed to synthesize porous carbon by adopting wheat straws, rice bran, almond shells, pig nails, plant leaves, corn, silk and starch as raw materials [5,11,12,13,14,15,16,17] These biomass-derived porous carbon products feature substantial micropores (

Electrochemical Tests
Materials Characterization
A g-1 5 A g-1 10 A g-1 20 A g-1 30 A g-1 40 A g-1 50 A g-1
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.