Hierarchical and Porous Structures of Carbon Nanotubes-Anchored MOF Derivatives Bridged by Carbon Nanocoils as Lightweight and Broadband Microwave Absorbers.

Abstract

High-performance microwave absorption (MA) materials have attracted more and more attention because they can effectively prevent microwave radiation and interference from electronic devices. Herein, a new type of MA composite is constructed by introducing carbon nanotubes (CNTs)-anchored metal-organic framework derivatives (MOFDs) into a conductive carbonnanocoil (CNC) network, denoted as CNC/CNT-MOFD. The CNC/MOFD shows a wide effective absorption band of 6.7GHz under a filling ratio of only 9% in wax-matrix. This is attributed to the hierarchical and porous structures of MOFD bridged by the uniformly dispersed conductive CNC network and the cross-polarization induced by the 3D spiral CNCs. Besides, the as-grown 1D CNTs improve space utilization, porosity, and polarization loss of the composites, resulting in the increase of imaginary permittivity, which further realizes impedance matching and energy attenuation. The Ni nanoparticles in layers of MOFD and at the tips of CNTs generate magnetic loss, promoting the low-frequency absorption ability. Resultantly, RCS values of the optimized composite in all tested theta (θ) ranges are less than -25dB m2 at 9.5GHz, effectively reducing the probability of the target detected by the radar.