Abstract

The present study aims to develop effective adsorption and oxidation of synthetic dye in wastewater by using the newly synthesized iron-amended activated carbon. Recently synthetic dye-containing wastewater has gained more attention due to its mass discharge, high toxicity and low biodegradation. For enhancing adsorption of dye and oxidative regeneration of dye-exhausted activated carbon, the novel amendment of iron-deposited granular activated carbon (GAC) was developed. It was to amend ferrous ion onto the acid-pretreated GAC when pH of iron solution was higher than the pH at point of zero charge (pH, pzc) of the GAC. Methylene blue (MB) in water was adsorbed onto the acid-treated iron- amended GAC (Fe-GAC) followed by single or multiple applications of H2O2. Batch experiments were carried out to study the adsorption isotherm and kinetics indicating adsorption of MB onto the Fe-GAC followed Langmuir isotherm and the pseudo-second order kinetics. The Fe-GACshowed the maximum adsorption capacity (qm) of 238.1 ± 0.78 mg/g which was higher than the virgin GAC with qm of 175.4 ± 13.6 mg/g at 20?C, pH 6 and the initial concentration of 20 - 200 mg/L. The heterogeneous Fenton oxidation of MB in the Fe-GAC revealedthat increasing the H2O2 loading from 7 to 140 mmol H2O2/mmol MB led to enhancing the oxidation efficiency of MB in the GAC from 62.6% to 100% due to the increased generation of hydroxyl radicals. Further enhancement of oxidation of MB in the Fe-GAC was made by the multiple application of H2O2 while minimizing OH radical scavenging often occurring at high concentration of H2O2. Therefore, the acid-treated iron-amended GAC would provide excellent adsorption capacity for MB and high oxidation efficiency of MB in the GAC with multiple applications of H2O2 and optimum iron loading.

Highlights

  • Synthetic dyes are widely used for textile, pulp and paper, plastic, food, cosmetic and pharmaceutical industries [1]

  • The results indicated that the maximum adsorption capacity of the Fe-granular activated carbon (GAC) in this study was higher compared with the virgin GAC

  • The result indicates the maximum adsorption capacity of the activated carbon prepared in this study was comparable with the works done by other studies on adsorption of Methylene blue (MB) in GAC [14,15]

Read more

Summary

Introduction

Synthetic dyes are widely used for textile, pulp and paper, plastic, food, cosmetic and pharmaceutical industries [1]. Efficient and cost-effective treatment processes of dyecontaining wastewater need to be developed [4]. Adsorption using granular activated carbon (GAC) as one of most reliable methods has been used to remove dyes in wastewater. It is simple, effective and independent from toxicity of dye chemicals. Regeneration of dye-exhausted activated carbon determines the overall operating costs because the dye-spent activated carbon needs to be regenerated to achieve its re-adsorptive capacity. The current thermal regeneration method often leads to significant deterioration of the carbon pore structure, specific surface area and functionality which influences on re-adsorptive capacity of contaminant-spent activated carbon [5]

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call