Abstract

The catalytic reactivity and selectivity of the first example of a nanostructured solid acid resin (1) are described. This new type of solid acid catalyst is formed by the self-assembly and copolymerization of two acidic lyotropic liquid crystals (LLCs), affording a columnar hexagonal polymer network with monodisperse nanochannels lined with sulfonic acid groups. The performance of this material as a heterogeneous catalyst was compared against that of two commercially available, amorphous sulfonic acid resins: Amberlyst-15 and Nafion NR50. Using the acid-catalyzed esterification of benzyl alcohol with 1-hexanoic acid in dry toluene as a test reaction, it was found that resin 1 displayed only slightly lower overall reactivity as compared to Amberlyst-15 and Nafion NR50 but more than an order of magnitude higher selectivity for the desired ester product over dibenzyl ether side-product. Control experiments revealed that the higher product selectivity is not due to differences in relative acidity between the nanostructured acid resin and the two amorphous resins. Instead, it appears that a large component of the enhanced selectivity is due to the regular nanostructure present in the LLC resin, which affords a much more uniform local acid microenvironment for reactions to occur. Resin 1 can also be recycled with almost complete recovery of catalytic activity and selectivity, and with essentially no leaching of reactive groups into the solution phase.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call