Abstract

Herein, we report an AlGaN channel metal insulator semiconductor high electron mobility transistor (MISHEMT) in dual material gate (DMG) architecture with two different dielectrics as gate insulator for enhancing the DC performance of the device. The use of a high-k dielectric material as gate insulator below gate metal 1 and a low-k dielectric below gate metal 2 results in significant threshold voltage variation along the channel. This contributes to improved average carrier velocity which in turn results in better current drive. The proposed device exhibits a peak current of 162 mA/mm at zero gate bias, whereas, the DMG and single material gate (SMG) AlGaN channel HEMTs offer currents of 137 mA/mm and 125 mA/mm respectively. The peak transconductances are about 24.66 mS/mm, 23.68 mS/mm and 22.71 mS/mm respectively for the proposed device, DMG and SMG HEMTs. The proposed device reduces the OFF current by an order of 106 compared to that of DMG HEMT.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.