Hermetic Seal Bonding at Low-temperature with Sub-micron Gold Particles for Wafer Level Packaging

Abstract

Au/Au hermetic sealing was successfully done using a rim structure covered with sub-micron-size Au particles by low-temperature thermo-compression bonding. The easy deformability of sintered Au particles is advantageous in terms of the compliance with surface irregularity as well as the insensitivity of surface flatness. From the deflection of Si diaphragms over the sealed cavity, an inside pressure of 100 Pa and the maximum leak rate in a range of 10−14 Pa·m3/s (He) were estimated, which is sufficient for many MEMS applications.