Abstract
P-type hydrogenated nanocrystalline silicon (nc-Si:H) has been used as a hole-selective layer for efficient n-type crystalline silicon heterojunction (SHJ) solar cells. However, the presence of an additional valence band offset at the interface between intrinsic amorphous hydrogenated silicon and p-type nc-Si:H films will limit the hole carrier transportation. In this work, it has been found that when a heavily boron-doped silicon oxide layer deposited with high hydrogen dilution to silane (pB) was inserted into their interface, the fill factor of SHJ solar cells increases 3% absolutely because of the reduced valence band offset and the increased opportunity to provide a hopping tunnel assisted by the doping energy level and valence band tail states. Furthermore, the additional boron incorporation in intrinsic amorphous silicon adjacent to pB helps to enhance the built-in electric field, thus increasing the hole selectivity. By these means, the power conversion efficiency was improved from 23.9% to approximately 25%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.