Abstract
A cylindrical strip heater heat-transfer probe is designed and employed to measure heat-transfer coefficients in the horizontal configuration at three angular positions (0, 90 and 180° relative to gas flow while submerged in a magnetically stabilized fluidized bed of 1086 μm iron shots. The superficial air velocity is varied up to about 3.8 ms −1, and measurements have been conducted for five values of magnetic-field intensity up to 5662 A m −1. In each case, pressure drops across the bed and a section of it are determined to obtain values of superficial minimum fluidization and minimum bubbling velocities, and gross bed voidage. The heat-transfer coefficient is found to be dependent on the angular position at the horizontal cylindrical probe immersed in the bed. The magnetic field destabilizes the gas pocket at the upstream side of the probe and this characteristically influences the h w values. The magnetic interparticle forces augment the gas flow in the equatorial lateral zones by the formation of a channel at the probe surface leading to gas bypassing. At the downstream side, the variation is somewhat similar to the variation observed for the total heat-transfer coefficient. Experimental minimum bubbling velocities are well corrected by a semitheoretical expression proposed by the authors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.