Abstract
To verify the adequacy of various models of heat release in ammonium dinitramide flame to real processes, chemical processes in products of thermal decomposition at a pressure of 10 torr and in ammonium dinitramide [ADN; NH4N(NO2)2] flame at a pressure of 0.4 to 60 atm are numerically simulated. The calculations are performed on the basis of a detailed kinetic mechanism and boundary conditions correlated with experimental data, thermodynamic properties, and chemical composition of ADN. The kinetic mechanism includes submechanisms that describe high-temperature chemical processes in NH3/N2O/NO/NO2/HNO2/HNO3 and NH3/HN(NO2)2 mixtures, and the global stages of aerosol decomposition. Based on calculated and experimental data, the role of dinitraminic acid HN(NO2)2, aerosols, and ADN vapor in heat release in the ADN flame zone adjacent to the burning surface is estimated. The calculations predict that the main source of heat release in the cold flame zone at p ≥ 3 atm is dinitraminic acid incoming through the channel of dissociative evaporation ADNliq → NH3 + HN(NO2)2 from the burning surface. In the high-temperature flame zone, heat release is caused by the reaction that occurs in the NH3/N2O/NO/NO2/HNO2/HNO3 mixture. At moderate pressures, the high-temperature and low-temperature zones are separated by an induction zone. The stage governing production of the OH radical, which plays an important role in combustion, in the induction zone is the reaction HNO3 + M → OH + NO2 + M. Because of a high activation energy of the stage, small temperature perturbations in the induction zone at low pressures lead to a finite change in the stand-off distance between the high-temperature flame zone and the burning surface. Therefore, small temperature perturbations in the induction zone, which are caused by admixtures in the sample or by heat transfer between the reacting gas and the ambient medium, may be responsible for disagreement between various experimental data and between experimental and calculated data on the stand-off distance between the high-temperature flame zone and the burning surface. In numerical calculations, the position of the high-temperature zone is effectively controlled by varying rate constants of elementary stages within admissible limits.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.