Abstract
Nb-20Mo-15Si-5B-20(Cr,Ti) alloys have been subjected to annealing treatment for 2 hours in a range of temperatures from 700 to 1400oC and quenched in water to perform the microstructural characterization for these two new alloys. As cast structure consists of a solid solution phase, , and silicides (Nb5Si3) in both alloys but Cr alloy also contains NbCr2 and Nb3Si phases. Heating to higher temperature introduces Ti silicides in the microstructure for Ti alloy. The oxidation in air has been conducted on these alloys in the same temperature range for 24 hours. Weight gain per unit area as a function of temperature provides the oxidation curves while characterization techniques using SEM, EDS on SEM, x-ray mapping, and XRD has yielded the analyses of the oxide scale. The scale consists of various oxides of Nb, Mo, Cr, Si, and Ti. Cr alloy appears to offer higher oxidation resistance in the selected range of oxidation temperatures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
