Abstract

An experimental study is conducted to investigate the heat transfer augmentation in developing turbulent flow through a ribbed square duct. The duct is made of 16mm thick bakelite sheet. The bottom surface of the ribbed wall having rib pitch to height ratio of 10 is heated by passing a c current to the heater placed under it. The uniform heating is controlled using a digital temperature controller and a variac. The results of ribbed duct are compared with the results of a smooth duct under the same experimental conditions. It is observed that the heat transfer augmentation in ribbed duct is better than that of the smooth duct. At Re=5.0 × 104, the mean temperature of air flowing through the ribbed duct increases by 2.45 percent over the smooth duct, whereas in the ribbed duct Nusselt number increases by 15.14 percent than that of the smooth duct with a 6 percent increase in pressure drop.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call