Abstract
Influences of V-nozzle turbulator inserts in conjunction with a snail entry on heat transfer and friction loss characteristics in a circular tube are experimentally investigated in this paper. In the present work, a set of converging-diverging nozzles like a venturi structure (referred to as V-nozzle) used as a turbulator/reverse-flow generator is placed inside the test tube through which air as the test fluid is passed. Also, the snail is mounted at the tube entrance to create a decaying swirl flow. The effects of the snail entry and insertion of V-nozzles with three different pitch ratios, PR = 2.0, 4.0, and 7.0 on heat transfer rate in the tube are examined for the Reynolds number ranging from 8000 to 18,000. The experimental results are displayed in terms of Nusselt number ( Nu) and friction factor ( f) as a function of Reynolds number ( Re). The values of Nusselt number and friction factor for utilizing both the V-nozzle and the snail entry are found to be considerably higher than that for using the V-nozzle alone or the plain tube. The use of PR = 2.0 leads to higher Nusselt number and friction factor values than that of PR = 4.0 or 7.0. To assess the real benefits in using the turbulator and the swirl generator of the enhanced tube, empirical correlations in terms of Re and PR for Nusselt number, friction factor and performance evaluation criteria are also determined.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.