Abstract

Stable aqueous TiO 2 nanofluids with different particle (agglomerate) sizes and concentrations are formulated and measured for their static thermal conductivity and rheological behaviour. The nanofluids are then measured for their heat transfer and flow behaviour upon flowing upward through a vertical pipe in both the laminar and turbulent flow regimes. Addition of nanoparticles into the base liquid enhances the thermal conduction and the enhancement increases with increasing particle concentration and decreasing particle (agglomerate) size. Rheological measurements show that the shear viscosity of nanofluids decreases first with increasing shear rate (the shear thinning behaviour), and then approaches a constant at a shear rate greater than ∼100 s −1. The constant viscosity increases with increasing particle (agglomerate) size and particle concentration. Given the flow Reynolds number and particle size, the convective heat transfer coefficient increases with nanoparticle concentration in both the laminar and turbulent flow regimes and the effect of particle concentration seems to be more considerable in the turbulent flow regime. Given the particle concentration and flow Reynolds number, the convective heat transfer coefficient does not seem to be sensitive to the average particle size under the conditions of this work. The results also show that the pressure drop of the nanofluid flows is very close to that of the base liquid flows for a given Reynolds number.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call