Heat Transfer and Deformation Behavior of Shell Solidification in Wide and Thick Slab Continuous Casting Mold

Abstract

With the considerations of the behaviors of shell deformation, mold flux film and air gap dynamic distribution in shell/mold gap, a two dimensional slice-travel transient thermo-mechanical coupled model of simulation shell solidification in wide and thick slab continuous casting mold was developed by using the commercial program ANSYS. The evolutions of strand-mold system thermal behaviors, including the air gap formation and the mold flux film dynamical distribution in shell/mold gap and shell temperature field, and the evolutions of shell deformation and stress distribution of peritectic steel solidified in a 2120 mm wide and 266 mm thick slab continuous casting mold were analyzed. The results show that the air gap formation and the thick mold flux film distribution mainly concentrate in the regions 0–21 mm and 0–7 mm, 0–120 mm and 0–100 mm off the shell wide and narrow faces corners, and thus the hot spots are given rise to form in the regions 15–55 mm and 15–50 mm off the shell wide and narrow face corners. The shell server deformation occurs in the off-corners in the middle and lower parts of the mold. The stress evolution in shell surface is tensile stress, while that in shell solidification front is compressive stress.