Heat- mass transfer and flow characteristics of two-phase countercurrent annular flow in a vertical pipe

Abstract

Experimental and theoretical results on flow, heat and mass transfer characteristics for the countercurrent flow of air and water in a vertical circular pipe are compared. An experimental setup was designed and constructed. Hot water is introduced through a porous section at the upper end of a test section and flows downward as a thin liquid film on the pipe wall while the air flows countercurrently. The air and water flow rates used in this study are those before the flooding is reached. A developed mathematical model is separated into three parts: A high Reynolds number turbulence model, in which the local state of turbulence characteristics consists of the turbulent kinetic energy (k) and its dissipation rate (ϵ).The transport equations for both k and s are solved simultaneously with the momentum equation to determine the kinetic turbulence viscosity, the pressure drop, interfacial shear stress and then the friction factor at the film/core interface; Heat and mass transfer models are proposed in order to estimate the distribution of the temperature and the mass fraction of water vapor in gas core. The results from the model are compared with the present experimental ones. It can be shown from the present study that the influence of the interfacial wave phenomena is significant to the pressure loss, and the heat and mass transfer rate in the gas phase.