Abstract

This article is an attempt to explore the heat transfer features of the steady three-dimensional rotating flow of magneto-hydrodynamic hybrid nanofluids under the effect of nonlinear radiation over the bi-directional stretching surface. For this purpose, two different nano-particles, namely silver (Ag) and molybdenum di-sulfide (MoS2), were selected. Three different conventional base fluids were utilized to form desired hybrid nanofluids such as water (H2O), engine oil (EO), and ethylene glycol (EG). We obtained steady three-dimensional highly nonlinear partial differential equations. These highly nonlinear partial differential equations cannot be solved analytically, so these equations were handled in MATLAB with the BVP-4C technique with convergence tolerance at 10−6. The graph depicts the effect of the magnetization effect, thermal radiation, and stretching ratio on rotating hybrid nanofluids. Additionally, the impact of thermal radiation on the heat coefficient of three different hybrid nanofluids is being investigated. The augmentation in magnetization decreases the primary velocity, whereas the increment in radiation enhances the primary velocity. The stretching ratio and the presence of higher magnetic forces increase the temperature profile. The concentration profile was enhanced with an increment in the magnetic field, stretching, and rotation ratio. The maximum Nusselt number was achieved for the Ag-MoS2/EO hybrid nanofluid. It was concluded that augmentation in nonlinear radiation enhances the heat transfer coefficient for the examined cases (I) and (II) of the hybrid nanofluids. The Nusselt number doubled for both the examined cases under nonlinear radiation. Moreover, it was discovered that Ag-MoS2/water produced the best heat transfer results under nonlinear radiation. Therefore, the study recommends more frequent exploration of hybrid nanofluids (Ag-MoS2/water) when employing nonlinear radiation to analyze the heat transfer coefficient.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call