Abstract

Although self-healing protective coatings have been widely studied, systematic research on healing performance of the coating according to damage width has been rare. In addition, there has been rare reports of self-healing of the protective coating having damage width wider than 100 µm. In this study, self-healing performance of a microcapsule type self-healing protective coating on cement mortar was studied for the coating with damage width of 100–300 µm. The effect of capsule-loading (20 wt%, 30 wt% and 40 wt%), capsule size (65-, 102- and 135-µm-mean diameter) and coating thickness (50-, 80- and 100-µm-thick undercoating) on healing efficiency was investigated by water sorptivity test. Accelerated carbonation test, chloride ion penetration test and scanning electron microscope (SEM) study were conducted for the self-healing coating with a 300-µm-wide damage. Healing efficiency of the self-healing coating decreased with increasing damage width. As capsule-loading, capsule size or coating thickness increased, healing efficiency of the self-healing coating increased. Healing efficiency of 76% or higher was achieved using the self-healing coating with a 300-µm-wide scratch. The self-healing coating with a 200-µm-wide crack showed healing efficiency of 70% or higher. The self-healing coating having a 300-µm-wide scratch showed effective protection of the substrate mortar from carbonation and chloride ion penetration, which was supported by SEM study.

Highlights

  • A protective coating is used to protect a substrate material from various environmental deterioration substances such as water, carbon dioxide and chloride ions

  • Accelerated carbonation test, chloride ion penetration test and scanning electron microscope (SEM) study were conducted for self-healing coating with a 300-μm-wide damage

  • Cellulose-fiber-reinforced cement (CRC) board for coating samples and carbon tape for microcapsules were used for the SEM study

Read more

Summary

Introduction

A protective coating is used to protect a substrate material from various environmental deterioration substances such as water, carbon dioxide and chloride ions. One of the most important performances of the microcapsule-type self-healing coating is healing efficiency, which means a quantitative measure of the restoration and recovery of a lost or degraded property [5]. Another important performance of the self-healing coating is healable width of damage. Systematic research on the effect of damage width (>100 μm) on healing performance is needed to develop more efficient self-healing protective coatings. Self-healing performance of a microcapsule type self-healing protective coating for cementitious material was studied for the coating with damage width of 100–300 μm. Accelerated carbonation test, chloride ion penetration test and scanning electron microscope (SEM) study were conducted for self-healing coating with a 300-μm-wide damage

Materials
Instruments
Microencapsulation of Linseed Oil
Preparation of Coating Samples
Water Sorptivity Test
Determination of Healing Efficiency
Accelerated Carbonation Test
Chloride
Microcapsules
Water Sorptivity According to Damage Width and Capsule-loading
Other Performances of the Self-Healing Coating with Damage Width of 300 μm
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call