Abstract

A simple and novel speciation method for the determination of volatile organic compounds of selenium (dimethylselenide (DMSe) and dimethyldiselenide (DMDSe) has been developed using a headspace hollow fiber protected liquid-phase microextraction (HS-HF-LPME) combined with capillary gas chromatography–mass spectrometry (GC–MS). The organic solvent impregnated in the pores and filled inside the porous hollow fiber membrane was used as an extraction interface in the HS-HF-LPME of the compounds. The effect of different variables on the extraction efficiency was studied simultaneously using an experimental design. The variables of interest in the HS-HF-LPME were sample volume, extraction time, temperature of sample solution, ionic strength, stirring rate and dwelling time. A Plackett–Burman design was performed for screening in order to determine the significant variables affecting the extraction efficiency. Then, the significant factors were optimized by a Box–Behnken design (BBD) and the response surface equations were derived. Under optimum conditions, preconcentration factors up to 1250 and 1170 were achieved for DMSe and DMDSe respectively. The detection limit and relative standard deviation (RSD) (n=5, c=50μgL−1) for DMSe were 65ngL−1 and 4.8%, respectively. They were also obtained for DMDSe as 57ngL−1 and 3.9%, respectively. The developed technique was found to be applicable to spiked environmental and biological samples.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.