Abstract
This paper reflects the energy that can be harvested from the automatic sliding doors. Previously, swinging doors and revolving doors were used to harvest the energy. But due to difficulties to attain maximum range of motion through the swinging doors which is can open up to 900 and because of revolving doors take up a lot of spaces and it is not ideal to be located in small building, thus the use of automatic sliding doors was suggest for this research. The aims of this research are to analyze the output produced from the new system and compare it with the existing systems that use swinging and revolving doors. The kinetic energy which attained form the motion of sliding doors then was converted to ambient energy which can be later converted to electrical energy. The system used Piezoelectric generators to generate energy from the motion of sliding doors. There are 3 systems with different wheel diameter and number of piezoelectric modules placed within the tires of the wheel. The energy was produced by the deformation in the body of the tires caused by the load applied on the wheels. ANSYS’s software was used to simulate the stress acting on the wheel. It was found out the door produces 60.41 J and 80.52 W of energy and power assuming that the door is used for 120 minutes every day. It was concluded that the energy lost from the motion of sliding doors can be harvested and the system doesn’t take up much space as compared to revolving doors’ system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.