Harmonic/interharmonic estimation using standard deviation assisted ESPRIT method

Abstract

PurposeThis paper aims to accurately estimate harmonics/interharmonics in modern power system. There are several high spectral resolution techniques that have been in use for several years like Estimation of Signal Parameters via Rotational Invariance Technique (ESPRIT), Prony methods, etc. but these techniques require prior knowledge of number of modes present in the signal. Model Order (MO) estimation techniques have to make a trade-off between accuracy and their speed i.e., computational burden. Therefore, there is always a requirement of a technique that is fast as well as accurate.Design/methodology/approachThe proposed standard deviation (SD) method eliminates the requirement of energy validation test and analyses the distribution pattern, i.e. standard deviation of eigenvalues to identify the number of modes present in the signal. Signal is reconstructed using estimated modes and reconstruction error is obtained to show accuracy of the proposed estimation.FindingsSix test synthetic signals as well as one practical signal have been taken for validating the proposed method. The paper shows that proposed methodology has a better accuracy compared to modified exact model order (MEMO) method in high noise environment and takes very less computation time compared to the exact model order (EMO) method.Practical implicationsThe proposed method has been practically implemented for harmonic/interharmonic analysis at a sewage treatment plant at GIFT City, Gujarat, India. Apart from this the proposed method is modeled in python-based tool and is run into low-cost Raspberry Pi like hardware to create an onsite as well as remote monitoring device.Originality/valueSD-based approach for model order estimation is novel to this area. Further, the proposed method is compared with EMO and MEMO under varying noise conditions to check for accuracy and estimation time.