Harmonic balanced Jiles-Atherton hysteresis implementation for finite element simulation

Abstract

PurposeThe high calculation effort for accurate material loss simulation prevents its observation in most magnetic devices. This paper aims at reducing this effort for time periodic applications and so for the steady state of such devices.Design/methodology/approachThe vectorized Jiles-Atherton hysteresis model is chosen for the accurate material losses calculation. It is transformed in the frequency domain and coupled with a harmonic balanced finite element solver. The beneficial Jacobian matrix of the material model in the frequency domain is assembled based on Fourier transforms of the Jacobian matrix in the time domain. A three-phase transformer is simulated to verify this method and to examine the multi-harmonic coupling.FindingsA fast method to calculate the linearization of non-trivial material models in the frequency domain is shown. The inter-harmonic coupling is moderate, and so, a separated harmonic balanced solver is favored. The additional calculation effort compared to a saturation material model without losses is low. The overall calculation time is much lower than a time-dependent simulation.Research limitations/implicationsA moderate working point is chosen, so highly saturated materials may lead to a worse coupling. A single material model is evaluated. Researchers are encouraged to evaluate the suggested method on different material models. Frequency domain approaches should be in favor for all kinds of periodic steady-state applications.Practical implicationsBecause of the reduced calculation effort, the simulation of accurate material losses becomes reasonable. This leads to a more accurate development of magnetic devices.Originality/valueThis paper proposes a new efficient method to calculate complex material models like the Jiles-Atherton hysteresis and their Jacobian matrices in the frequency domain.