Abstract
Low velocity oxy-fuel (LVOF) flame spraying technique was employed to deposit poly-ether-ether-ketone (PEEK) powder onto the low carbon steel (Fe) or aluminum (Al) substrate. The adhesion index, micro-hardness and morphological properties were studied. The effects of interfacial roughness, substrate preheating, spray distance and magnetic field on the adhesion, hardness and morphological results were of our main interest. The results indicated that the optimum process conditions (smooth top-surface with high adhesion index and hardness) for thermal spray coating of PEEK on Fe or Al substrate were achieved at the substrate preheating temperature of 200 °C and with the spray distance of 100 mm. The adhesion index was increased with the increase in interfacial roughness. The hardness and adhesion index of the PEEK coating on Fe substrate increased with the application of magnetic field due to the increase in the degree of crystallinity of the PEEK under magnetic field. The recommended flux density under the experimental conditions was 17 mT.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
